ABG – BATHROOM VENTS
Akarsan ABG model helical blowing ceiling diffusers are used to provide a homogeneous mixture with room air within very short distances. They are ideal air blowing terminal units for ceiling heights between 2.6 and 4 meters. Air blowing direction can be adjusted. They can be produced with plenum cells upon request.
ACS , ACS + DA – DOUBLE ROW BLADE GRILLE + DAMPER
Akarsan ACS, ACS+DA (with damper) model double row wing grilles are used in blowing channels in ventilation systems, the wings are horizontally movable. Manufactured from specially rolled 6063 aluminum profile, standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request. It is produced with screws as standard. It is a grill damper accessory.
AKP-1 – SQUARE HONEYCOMB VENTS
Akarsan AKP-1 (damper) model grilles are used as suction and blowing grilles in ventilation systems. Manufactured from specially rolled 6063 aluminum profile, standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request. Manufactured with screws as standard, if no holes are required on the frame, it is produced with latch or spring system. It is a grille damper accessory. Control dampers can be made of aluminum in the form of opposing or parallel wings.
AKP-2 – SQUARE HONEYCOMB CASE VENTS
Akarsan AKP-2 model cased grilles are used as suction grilles in ventilation systems. They are manufactured from specially rolled 6063 aluminum profiles. Standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request. They are manufactured with screws as standard, if no holes are required on the frame, they are manufactured with a latch or spring system.
ALM – LINEAR GRILLES
Akarsan ALM model linear grilles are mainly used on fan coils and radiators in ventilation systems and can also be used as blowing and suction grilles in practice. Manufactured from specially rolled 6063 aluminum profile, standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request. It is produced with screws as standard, if no holes are required on the frame, it is produced with latch or spring system. Grille damper, plenum box and blind case are accessories.
ATM – DOOR AND WALL TRANSFER GRILLES
Akarsan ATM model transfer grilles are used in air transfer between spaces in ventilation systems with the feature that the other side is not visible when viewed from one side. They are manufactured from specially rolled 6063 aluminum profile. Standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request.
ASKK – SEALED ACCESS PANEL
With its insulated cover, hinged opening/closing mechanism, and sealed profile gasket, it allows access to high-temperature ducts and areas requiring airtightness. The hinged design facilitates maintenance, inspection, and cleaning of ducts and equipment under high temperatures, while its decorative appearance provides architectural solutions. The standard coating is made of natural galvanized sheet.
Optionally, it can be manufactured with electrostatic powder coating in standard colors RAL 9010–9016 or in other custom colors.
ATS , ATS+DA – SINGLE ROW BLADE GRILLE + DAMPER
Akarsan ATS, ATS+DA (with damper) model single row blade grilles are used in intake ducts in ventilation systems, the blades are horizontally movable. Manufactured from specially rolled 6063 aluminum profile, standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request. It is produced with screws as standard. It is a grill damper accessory.
AYCS , AYCS + DA – SINGLE AND DOUBLE BLADE GRİLLES WİTH OR WİTHOUT DAMPERS
FOR ROUND DUCTS
Akarsan AYCS, AYCS+DA (with damper) model round duct grilles are used to adjust the air volume in ventilation systems. Manufactured from specially rolled 6063 aluminum profile. Standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request. Manufactured with standard screws. Grille damper and deflector wings are accessories.
AKK – CONTROL COVERS (INTERVENTION COVERS)
Akarsan AKK model control covers are used for the purpose of performing the controls and maintenance of air conditioning equipment such as air heating and cooling, air flow control devices, which are applied inside the duct. In addition to standard production dimensions, special dimensions can be produced according to customer demand. The case is manufactured from specially rolled 6063 aluminum profile, standard coating process is done with electrostatic powder painting in RAL 9010 and 9016 color codes, other colors and anodized coating can be done upon request, the cover is manufactured from sheet metal with a thickness that will provide strength according to the case size.
